Kontur 600
It is designed for airless method marking in highways, using the fast-drying traffic paints and retroreflective glass beads.
It is designed for airless method marking in highways, using the fast-drying traffic paints and retroreflective glass beads.
Price:
66,000
€
Kontur 600
Registrator MP10
Road sign (claster)
Additional marking and glass bead gun
Keyset
CE Certificate
Diesel version 
Panel M11- Joystick for control panel M11
Headlight
Platform for worker- Flow sensor for the paint
- Three automatic glass bead guns
- Three automatic marking guns
This system is designed to be connected to the paint guns controller and allows monitor machine during its work. It includes GPS receiver and GSM modem.
Price: 800€
This road sign is using to attract driver's attention by clasters light
Price: 2000€
Additional guns could be useful for marking additional line
Price: 1080€
These keys could be necessary in assembling and disassembling case
Price: 90€
That machinery is fully ISO9001 certified and proudly carry the CE certification.
Diesel engine Perkins with 61HP (44.7 kW)
The panel controls each of three (five) marking guns in the manual, automatic and semi-automatic modes
Headlight is illuminating the road surface during the darkness periods
This platform is necessary for worker, which will place cones on the road surface during the road marking process
Three guns could sprinkle three lines simultaneously
Three guns could mark three lines simultaneously
- Extra options You can add anything you need
- Basic equipment Everything in that part is included in the price
Production effectiveness
Using enamel under high pressure while applying marking lines allows to work with high-viscosity paints and paints with heavy percentage of nonvolatile con-tent. Due to these characteristics the enamel dries fast and doesn’t spread even while full coat application.
Using hydraulic drive within gearing configuration of the machine ensures smooth adjustment of working and road speed with high rate of stability.
Swivel chassis usage permits to avoid running over the fresh marking lines while moving along the minimum radius and also provides machine’s high maneuvera-bility.
Functionality
Air-free method of markings application technology allows to achieve ultimately even edges of the applied lines.
Extended paint containers filler points considerably facilitate charging.
There are loops which remove static electricity from hand spray gun and washing-out containers provided.
While the existing markings reapplication it is possible to use line’s beginning/end light detector.
Lighting facilities allow to work during night-time.
Comfort
Comparatively small size of the machines allows to use them for road markings application within the limits of the city without interfering the city traffic. There is a bracket which allows to install a spray gun for border line application designed, also there exists an ability to move the steering wheel and operator’s seat onto the right side of the machine.
Hairline pointer hydraulic drive permits to move it upward and downward from the operator’s workplace.
Quality
Using enamel under high pressure while applying marking lines allows the material to penetrate deeply into the road surface pores, sweeping fine dust off the road surface. “Kontur-600” is certified by safety standards to CE mark.
Reliability
The machine comprises components of the world-known manufacturing compa-nies, such as Graco, Danfoss, Festo, Fini that ensures quality and extended work-ing life.
Additional information
There is an ability to install extra spray guns, cluster pointer “Detour” and a stool at the back platform for the assistant worker installing the rode cones. One charge of the road material is enough to apply 1200 m2 of the markings. To transport the machine you need drop-frame trailer with carrying capacity no less than 3 ton.
Using enamel under high pressure while applying marking lines allows to work with high-viscosity paints and paints with heavy percentage of nonvolatile con-tent. Due to these characteristics the enamel dries fast and doesn’t spread even while full coat application.
Using hydraulic drive within gearing configuration of the machine ensures smooth adjustment of working and road speed with high rate of stability.
Swivel chassis usage permits to avoid running over the fresh marking lines while moving along the minimum radius and also provides machine’s high maneuvera-bility.
Functionality
Air-free method of markings application technology allows to achieve ultimately even edges of the applied lines.
Extended paint containers filler points considerably facilitate charging.
There are loops which remove static electricity from hand spray gun and washing-out containers provided.
While the existing markings reapplication it is possible to use line’s beginning/end light detector.
Lighting facilities allow to work during night-time.
Comfort
Comparatively small size of the machines allows to use them for road markings application within the limits of the city without interfering the city traffic. There is a bracket which allows to install a spray gun for border line application designed, also there exists an ability to move the steering wheel and operator’s seat onto the right side of the machine.
Hairline pointer hydraulic drive permits to move it upward and downward from the operator’s workplace.
Quality
Using enamel under high pressure while applying marking lines allows the material to penetrate deeply into the road surface pores, sweeping fine dust off the road surface. “Kontur-600” is certified by safety standards to CE mark.
Reliability
The machine comprises components of the world-known manufacturing compa-nies, such as Graco, Danfoss, Festo, Fini that ensures quality and extended work-ing life.
Additional information
There is an ability to install extra spray guns, cluster pointer “Detour” and a stool at the back platform for the assistant worker installing the rode cones. One charge of the road material is enough to apply 1200 m2 of the markings. To transport the machine you need drop-frame trailer with carrying capacity no less than 3 ton.
