Kontur 700TPK
It is designed for horisontal marking in city's areas and highways, using the thermoplastic and the fast-drying traffic paints with retroreflective glass beads and anti-skid agents.
It is designed for horisontal marking in city's areas and highways, using the thermoplastic and the fast-drying traffic paints with retroreflective glass beads and anti-skid agents.
Price:
103,700
€
Kontur 700TPK
Road sign (claster)
Headlight
Keyset
CE Certificate
Panel M11
Mechanical road brush 
Road sign
Two automatic marking guns- Two automatic glass bead guns
This road sign is using to attract driver's attention by clasters light
Price: 2000€
Headlight is illuminating the road surface during the darkness periods
Price: 100€
These keys could be necessary in assembling and disassembling case
Price: 90€
That machinery is fully ISO9001 certified and proudly carry the CE certification.
The panel controls each of three (five) marking guns in the manual, automatic and semi-automatic modes
Brush could clean road surface before road marking
This road sign is using to attract driver's attention by LEDs light
Two guns could mark two lines simultaneously
Two glass bead guns could sprinkle two lines simultaneously
- Extra options You can add anything you need
- Basic equipment Everything in that part is included in the price
Thermoplastic road striper is designated for both the liquid hot plastic and high solids paint application onto clean and even cement concrete and asphalt concrete surfaces also with the pressurized glass beads and anti-skid agents.
“Kontur 700TPK” is equipped with:
- diesel engine (1,9 TDI, 63 kW);
- compressor 700l/min);
- hydraulic pumps.
- Pneumatic equipment.
- Thermoplastic tank – 350l.
- Paint tank - 350l.
- Glass beads tank – 120 kg.
- Graco paint pump 26l/min.
- Diesel tank – 50l
- Receiver.
- thermoplastic extruder with 8 integrated valves (8 x 50 mm);
- two automatic paint guns.
- two automatic glass bead guns;
- mechanical rotating brush (500 mm wide);
- Electronic control panel M11.
The basic technical specifications of the unit:
- width of thermoplastic lines applied from 100 up to 400 mm;
- width of paint lines applied from 100 – 200mm.
- extrusion thermoplastic temperature 180 – 2100C;
- max. transport speed 12 km/h;
- striping speed 1-5 km/h;
- max. road surface angle up to 20%;
- Fuel consumption by diesel burner – 3.8l/h.
- dimensions, mm:
- length 5700;
- width 2200;
- height 2700;
- curb weight AT/MT – 3500 / 4050 kg;
- crew – 2 persons;
Extruder, paint striping block, brush and operator seat can be mounted on any side of the machine.
“Kontur 700TPK” is equipped with:
- diesel engine (1,9 TDI, 63 kW);
- compressor 700l/min);
- hydraulic pumps.
- Pneumatic equipment.
- Thermoplastic tank – 350l.
- Paint tank - 350l.
- Glass beads tank – 120 kg.
- Graco paint pump 26l/min.
- Diesel tank – 50l
- Receiver.
- thermoplastic extruder with 8 integrated valves (8 x 50 mm);
- two automatic paint guns.
- two automatic glass bead guns;
- mechanical rotating brush (500 mm wide);
- Electronic control panel M11.
The basic technical specifications of the unit:
- width of thermoplastic lines applied from 100 up to 400 mm;
- width of paint lines applied from 100 – 200mm.
- extrusion thermoplastic temperature 180 – 2100C;
- max. transport speed 12 km/h;
- striping speed 1-5 km/h;
- max. road surface angle up to 20%;
- Fuel consumption by diesel burner – 3.8l/h.
- dimensions, mm:
- length 5700;
- width 2200;
- height 2700;
- curb weight AT/MT – 3500 / 4050 kg;
- crew – 2 persons;
Extruder, paint striping block, brush and operator seat can be mounted on any side of the machine.
